Keeping your home safe is important, and a garage door repair can help to do that. If you need to fix your garage door, you’ll want to know the best ways to do it. Using the right tools and the oh-so-common snags can mean the difference between a faulty door and a repaired door.
First and foremost, you’ll need to set aside a good chunk of time for the task. A good time to do it is during the colder months, when the door will be harder to slide. In addition, if you’ve got a door opener, you’ll need to make sure that it is properly aligned and that it has a photoelectric sensor that can stop the door from closing if the electric beam is broken.
It’s also a good idea to have a good understanding of what’s possible and what’s not. For example, you can’t just replace the springs if you have a torsion spring unit. You’ll have to remove several parts, including the motor, to do so. If you’re feeling especially adventurous, you can order a new motor online.
The circuit board holds the lightbulb and wire terminals. You’ll need a bit of patience to replace the board. You’ll also need a 1/4-inch nut driver.
There’s also a good chance that you’ll need to lubricate your garage door opener’s rollers, belt, and pulleys. You’ll find that using a quality lubricant is the best way to ensure that you’re not hearing any grinding noises. Ideally, you’ll use a lubricant that is dirt repellant, which will also prevent any unwanted noises from the chains and rollers.
The ol’ fashioned keypad is another useful feature of your garage door opener. If you’ve been unable to get your opener to respond to the remote, you may have a faulty keypad. If you can’t open your door using the keypad, you’ll need to unplug the device.
Similarly, you’ll need to tighten the cables on your garage door. You can do this yourself or hire a professional. While a DIY job will likely save you a few dollars, it can also cause damage. You should also check to see if your garage door’s warranty will cover replacements. A reputable company will be able to help you with this.
The main drive gear is the most common component to fail on your opener. It’s also the most expensive, as you’ll have to remove several components to make the repairs. The main drive gear is a plastic gear that comes in contact with a worm drive gear on the motor.
A garage door with a functioning keypad or lights will also be a good idea. You can even set up a system to control the temperature and lighting in your garage. You’ll be able to program your garage door opener to automatically turn on a few lights each night, as well as control the heat and coolant levels. This will also save you a few bucks on energy bills.